Mercruiser Outdrive Parts Drawings *How to Videos

T.C. Electronics/Marine Home Page

Mercruiser Bellow 3 inch Elbow to 4 inch Y-Pipe

Upper Exhaust Bellow 3 inch Elbow to 4 inch Y-Pipe

  • Bellow compatible with Mercruiser models:
  • 165/170/3.7L/180/190/470/485/488 manifolds
    (1980 - 1989)
  • Chevy 305/350/377 (1983 - up)
  • Big block 454/502 (1981 - up)
  • V6 229/262 (1983 - up) Installs on to 3 inch 15 degree center mounted risers with 4 inch elbow

89070 Mercruiser upper exhaust bellow

89070 Mercruiser upper exhaust bellow

The upper exhaust hose (89090) can be installed on to 3 inch center mounted risers to 4 inch elbow, or 4 inch y-pipes with rear mounted risers on various inline 4 cylinder, V6 and V8 models. This hose is tapered, with the top end having a diameter of 3", and lower end having a 4" opening. When replacing this part, it is recommended to inspect the lower bellow (89090 or Mercury 32-90949T) which mounts below this part. If the lower piece has any cracks or leaks, replace it as well. If new hose clamps are required, use clamp 01056 on the 3" end, and 01100 on the 4" end.

P/N 89070 Exhaust tube - 3” center mounted riser to 4” elbow OEM 70981A3 works with 120/140 (1982 - 1995) $32.95

Customers who ordered P/N 89070 also purchased:

89090 Lower Tube

89090 Lower Tube

Lower tube P/N 89090 or OEM 32-90949T is the 3 inches, installed onto Mercury part 98504A3 $34.95

 

P/N 51110 or OEM 98504A3 cast iron manifold elbow / riser. If your existing part has a leak (determined by performing a pressure test), make sure to replace this item to ensure your cooling system is functioning properly.

21950

21950

Transom kit P/N 21950. Contains all bellows and gimbal bearing for bell housing. Replaces OEM 30-803097T1, Sierra 18-2601. $145.95