OMC 800/Cobra parts *Outdrive drawings *How to videos

T.C. Electronics/Marine (416) 751-7326 Home Page

OMC electric shift stern drive repair *How to part 3

OMC Stringer lower gear-case electric shift clutch spring, forward and reverse coil repairs picture part # 36 to 51

  • How to electric outdrive repair part 3
  • Step by step sterndrive repair help with picture

Exploded View Drawings
Search by part number or description here

36 Bearing slide hammer will be required to remove race
36 Bearing slide hammer will be required to remove race

Bearing slide hammer will be required to remove race

37
37

Race to be removed only if required

38
38

Side hammer

39
39

39 slid hammer with bearing pulled

40
40

Bearing shim

41 Forward shim mached with gear case
41 Forward shim mached with gear case

Forward shim mached with gear case

42
42

Timken bearing race OEM 02420

43 Empty case
43 Empty case

Empty case with pinion bearing race

44
44

Press or push down to remove outside part of pinion bearing race

45 Torrington
45 Torrington

Torrington bearing out side case

46 AG-35547
46 AG-35547

AG-35547

47
47

This bearing has lead in tapper of .003 on one side. Use the smaller end to start pressing bearing in.

48 Measure to find lead in side note writing should be placed down
48 Measure to find lead in side note writing should be placed down

Measure bearing to find lead in side note writing should be placed down

49 Note wire should be green in colour
49 Note wire should be green in colour when reconnecting to swivel

Note wire should be green in colour when reconnecting to swivel

50 reading should be 4 to 6.5 ohms
50 reading should be 4 to 6.5 ohms

Note coil reading should be 4 to 6.5 ohms

51
51

Note wire should be blue in colour when reconnecting to swivel